Tech dive gear will allow you to go deeper under the water. These special gears come with features that aren't available in regular recreational diving equipment. BCDs for sidemounts and backplate/wing divers are examples. Advanced regulators, tanks, computers and computers are essential if you want to dive in technical environments. This article will help you identify the best gear for your requirements.
Equipment for technical diving
Tech diving gear is modular. This means that it can be easily customized to meet your individual needs. A tech BCD is composed of three basic components: a steel or aluminium backplate, harness, air bladder, and a belt. D-Rings are available to modify the harness to your specific body size and type. A great alternative is the wings. There are many sizes and configurations. You can even use just one tank to tailor your gear for that tank.
Types of gear
There are many different types of equipment for recreational and technical diving. Each type of diving requires a specific equipment. Tech divers need more than a regular BCD. They may prefer a backplate/wings or sidemount BCDs. These divers require sophisticated tanks, regulators and computers. This article will explore the differences between the two types of gear and what you should look for in your technical diving equipment. The following information will help you make the right choice for your diving needs.
Configuration and use of gear
Tech diving gear is different from recreational diving because technical divers have to deal with different conditions. All gear has the same purpose, which is to keep a diver comfortable while they dive. Listed below are some tips on tech dive gear configuration. The gear configuration should be easy but highly effective. A good regulator will be able to deliver high performance ratings. When diving deep, the density of gas increases, so the equipment should be well-made to cope with this change.
Computers
The most advanced tech diving computers are equipped with larger displays and HD screens. They also have advanced features for technical dives. They can be used for all kinds diving, from technical to recreational. Some models also have hoseless integration, digital compasses, or GPS features. Safety is paramount. Divers computers that don't accurately calculate decompression factors can cause serious problems.
Protective thermal insulation for cold-water divers
Many Special Operations Forces personnel perform operations and training in neoprene wetsuits. These suits only offer a very limited amount of insulation when they're at the surface. Only about 1/4 of their insulation is available when they're at 100 feet. New wetsuit designs with R-values below ten are being developed to address this problem. These suit designs will reduce thermal bridging by incorporating innovative multi-layer constructions with stop-gap materials.
Rebreathers
You may have wondered about the differences between rebreathers and traditional regulators if you are considering upgrading from open circuit scuba gear. Rebreathers are more difficult to maintain and require more diving time than open circuit regulators. They also have more potential for harm. Before you buy a rebreather, make sure to research the benefits.
Sidemount BCDs
The STEALTH2.0 was the first sidemount BCD designed for technical divers. The backmount harness has an integrated TEC wing that provides additional security for deep dives and decompression stops. The manufacturer also offers a new low-pressure inflator that can be mounted to the bottom. The STEALTH 2.0 is available in single tank, double-tank, or dual-tank configurations.