Wreck diving is often associated with recreational diving and exploring shipwrecks. While wreck diving is the traditional site, many people are now using retired ships to create artificial reefs. Learn more about wreck diving by reading on. Here are some tips to help you get started. First, get your equipment ready! There are many kinds of equipment. You can make the difference of a fun or dangerous dive by choosing the right gear.
Non-penetration wreck diving
Here are some tips for beginners who want to dive non-penetration. First, wrecks are often a place to fish, so divers should be aware of any lines or fishing nets. Also, divers should be aware of the terrain beneath them. Currents and sharp edges can cause them to drift away from their desired destinations. This type of terrain is dangerous and it's best to avoid wreck diving.
Although technical penetration diving sounds easier than it actually is, there are many dangers involved. Light zone diving poses dangers due to overhead hazards, proximity of the wreck structure, and possible trapping in narrow passageways. Silt and mud can cause visibility problems and make orientation extremely difficult. To avoid these dangers, non penetration wreck diving requires that divers stay within the visible zone and make a move towards an exit point.
Viewing a sunken shipwreck
In addition to traditional surveys, surveying a sunken wreck requires specific equipment and a thorough understanding of the maritime history of the area. Depending upon the time and accuracy needed, the survey method can include a GPS fix, a tape baseline or offset and tie measurements. There are many methods that can be used to survey a sunken wreck.
A shipwreck investigation is designed to identify and locate the ship. It should also identify navigational hazards, environmental conditions, and historical events. A summary of the vessel's structure, the incident that caused it to sink, and any previous archeological surveys should be included in the survey report. To make precise measurements, it should be possible plot the site on a chart.
Equipment necessary
It is important to know the details of a shipwreck before diving. Learn about the layout of the wreck, its key points and potential hazards. These things will help you prepare for your dive, and reduce the chance of an accident. Below you'll find the information you need to dive in a shipwreck. This checklist is important to review before you dive. You can also bring it to the dive site.
To avoid getting lost in the dark, you need to have good buoyancy control. To wreck dive, it is essential to maintain good buoyancy. You shouldn't dive in deep waters without a weight belt or a buoyancy controller tank. You will have a lot of fun diving if you have a weight belt. These two pieces of equipment will ensure your safety and that of others on the wreck.